SUPER CELL 100 SERIES
ATL Super Cell 100 Series features a flexible fabric bladder in a wide variety of shapes and sizes. They are FIA FT3 approved and include a 3-layer ballistic nylon reinforced bladder, 20 gauge steel container, foam baffling, fill plate and fuel pickup. They are compatible with all fuels with maximum 20% Ethanol. Whether you are on a circle track, a road course, a dirt oval or off road, the Super Cell 100 Series will be able to offer you something. Available in a wide range of shapes and sizes.
​
ATL’s Super Cell Series come with a 5 year limited warranty. See table below for size variants.
​
Fuel Compatibility: All Fuels with maximum 20% Ethanol. (Foam upgrade required when using 100% methanol).
​
​
​
.jpg)
STEEL CONTAINER
​The container is constructed of 20 gauge steel powder coated red with a top load. Available in a wide range of sizes.
THE BLADDER
​The Bladder is an approved 3-layer ballistic nylon reinforced flexible bladder with cross-drilled composite nut-ring installed. It is crash resistant and deforms on impact.
THE FOAM BAFFLING
The SF103 Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the SF110 Safety Foam.
THE FILL PLATE
The Fill Plate is an aluminium plate that features a billet aluminium cap with flap type roll over valve. AN6, AN8 or AN10 outlet. AN6 return, AN6 vent-valve roll-over valve and AN6 Dipstick.
THE FUEL PICKUP
​A single scavenjet fuel pickup adhered to the right-rear corner. Hose is included. You can request alternate pick-up locations.
CONTAINERS
FUEL LEVEL SENSING
FOAM BAFFLING
ALUMINIUM CONTAINER
CAPACITANCE STYLE PROBE KIT
FLOAT STYLE PROBE KIT
SF110 METHANOL FOAM BAFFLING
“Top load” style light weight aluminium container.
Capacitance style fuel level sender kit (12V) is compatible with Race gas, Diesel and E10. The kits includes the level sensing probe and lighted gauge.
​
Float style fuel level sender kit (12V) is compatible with all fuels including E85+. The kit includes the level sending probe and lighted gauge.
​
Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the black SF110 Safety Foam.
​
ALUMINIUM FILL PLATES
TF703
OFF-SET 2.25” OD FILL NECK
REMOTE FILL W/ PADDLE VALVE
6x10” aluminium fill plate with off-set remote-fill filler neck with paddle valve. Comes with AN8 Outlet, AN6 Vent and AN6 Return. Can be drilled for fuel level sender unit.
​
TF525
2.25” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/PADDLE VALVE
6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.
​
TF193A-184A
2.25” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/FLAPPER VALVE
6x10” aluminium fill plate with remote-fill filler neck with flapper valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.
​
TF770
2.5” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/PADDLE VALVE
6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.
​
TF702
3” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/PADDLE VALVE
6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with AN8 Outlet.
​
SURGE TANKS
ST520
3-DOOR SURGE TANK
​ST524
2-DOOR SURGE TANK
For Road course, rally and off-road. This has a capacity of 0.8 gallons and comes with a ScavenJet AN8 Fuel pickup.
​For circle track use. This has a capacity of 0.8 gallons and comes with a ScavenJet AN8 Fuel pickup.
CAPACITIES & DIMENSIONS
